Lifting stage is the most commonly used product on stage, and its main function is to be used to move the set and actors up and down when the scene is changing. In addition, in order to highlight the main actors, the stage will rise slowly, the actors dance on the stage, creating a high and low picture on the stage, while the process of stage lifting and lowering action can also increase the performance effect.
13305262638
13305262638@163.com
Lifting stage is the most commonly used product on stage, and its main function is to be used to move the set and actors up and down when the scene is changing. In addition, in order to highlight the main actors, the stage will rise slowly, the actors dance on the stage, creating a high and low picture on the stage, while the process of stage lifting and lowering action can also increase the performance effect.
The lifting stage can be operated individually or in combination, which can form the conference mode and other required modes.
The lifting platform consists of steel structure, guiding device, driving device and control system. The drive system is equipped with double brakes to ensure that the braking is foolproof. Other components are: overload alarm, over-travel limit switch, guiding device and so on. When an accident occurs, a manual reset device can be used to move the lifting platform to a safe position.
Driving mode | Rigid chain, electric chain, rack and pinion, screw straight top (optional) |
Rated dynamic load | ≥2.5kN/㎡ |
Speed | 0m/s-0.30m/s(±8%) |
Mesa gap | The horizontal gap between the lifting platform and the fixed floor should not be greater than 12mm |
Stopping accuracy | ≤±3mm |
Noise | Noise value ≤45dB(A) |
Safety switch | The lifting platform has an upper limit switch and a lower limit switch. After the limit switch is triggered at the rated speed, the equipment can stop running |
Anti-shear and anti-crush protection devices | An anti-shear protection device should be installed at the position where the electric drive lifting platform and its peripheral equipment may produce shear, so as to protect against shear damage that may be caused by relative motion. The buffer distance of the anti-shear protection device shall be greater than the maximum operating distance of the device when the anti-shear protection device stops under rated load and rated speed. |
Locking device | A platform raised by a wire rope or chain shall be provided with a locking device at a position where its platform is used as a stage floor and for long-term stationary use. |
Light signal and light indicator | The necessary equipment running lights and buzzers that can be turned off should be set up without affecting the audience's viewing of the performance |
Overspeed protection | The lifting platform is set with overspeed protection when the input speed exceeds the set value, the system cannot input |
Emergency shutdown control element | The emergency stop switch is provided on the control platform, which has the function of emergency stop, and the emergency stop is effective |
Electrically controlled safety loop | The motion state response of the control element and the device is consistent and effective |
Warning signs about safety | The console warning signal is consistent with the operating state of the equipment and effective: The real-time status of the safety signal can be monitored on the console human-machine interface. |
Note: The product equipment is not upgraded regularly, and the parameters are updated without notice.
Service hotline
0523-89989358 / 13305262638
13305262638@163.com
Add
No.198, Jinma East Street, Baima Town, Gaogang District, Taizhou City
Copyright ? 2024 Jiangsu Gammy stage Equipment Co., LTD 蘇ICP備12014174號-1 Powered by ：MUZINFO
